Are High Speed and High Frequency PCBs the Same?
What is the definition of high-speed PCB?
In many articles, we often see expressions like high speed/HighfrequencyPCBs, high-speed PCB manufacturer, high-frequency PCB design, and so on.But are high-speed PCBs and high-frequency PCBs the same?In this article, we will illustrate everything clearly.
What is High-Speed PCB?
There is a point about the definition of high-speed PCBs: a high-speed PCB is a circuit board having a digital circuit speed at or above 45 to 50MHZ, and digital circuit signals account for more than one-third of the entire system.
But is this definition of high-speed PCBs correct?If you take it for granted, and when you are doing a PCB project whose maximum signal speed reaches 49.9MHz, you feel relieved because this is not a high-speed PCB and keep moving on.Finally, the PCB fails, the delivery has to delay, and you miss the expected bonus.
In fact, high-speed PCBs do not have an authoritative definition.Back in the 1960s, when digital electronics began developing, the signal speed was low, and PCB design could be done without much effort.Later, the digital circuit signal speed elevates, and engineers find that traditional PCB designing doesn’t work for these high-speed circuits, so they optimize the circuit design and use specific PCB base materials.The PCBs developed for these high-speed circuits are called high-speed PCBs.But no specific signal speed value is defined for speed-speed values, and no necessity to do it.
FPC manufacturer China talk how to define high-speed PCBs depends on practices: whether the signal speed is high enough to affect the circuit impedance or other circuits/components, whether there appears signal radiation in the circuit board, whether there appears the skin effect or ionization loss, etc.
Are High-Speed PCBs and High-Frequency PCBs the Same Thing?
Though high speed and high frequency have different meanings, high-speed PCBs and high-frequency PCBs are basically the same printed circuit boards.The carrier of modulated signals is the sine wave.A high-speed circuit means the voltage rises or drops in a short time period, and a high-frequency circuit means the circuit cycle is short (frequency is the reciprocal of the period).
High-speed PCB signals
When the signal frequency rises, the cycle shortens.In the cycle, to ensure enough time for the signal to maintain stability, the time for the signal to rise and drop has to be short.So this leads to high speed.In other words, high-frequency PCBs are also high-speed PCBs.
There is no exact distinction between high-speed PCBs and high-frequency PCBs.Even their base materials are the same.So when someone asks the difference between high-speed PCBs and high-frequency PCBs, tell them to ignore the name of the circuit board and focus on how to keep the circuit signal integrity.
What Should We Care about - High-Speed PCB Signal Integrity
High-speed/high-frequency PCBs are difficult to design because the signals can easily radiate/couple and affect the signal quality.Here are some points to keep high-speed PCB signal integrity:
1.PCB wires should be short and avoid loops.(don't make them become antennas).
2.Have a ground layer and power layer to shield signals radiation between layers.
3.Reduce distributed inductance and electromagnetic compatibility of when auto wiring for the key signals.
4.Place the wave filter and decoupling components near the interface.
5.When the circuit board has high, medium, and low-speed signals, keep the high and medium-speed signals away from the interface.
Choose a reliable PCBmanufacturer :
The aim of a high-speed PCB project is to deliver the products in time, if possible, successfully at once.So the high-speed PCB had better manufactured by an experienced manufacturer like Sun&Lyun (深联电路) is a one-stop high-speed PCB manufacturer with 22 years of experience and provides free one-on-one engineering support for high-speed/high-frequency PCB projects.
Other news about S&L
- Sun&Lynn Circuits CO., Ltd. was invited to attend the Sixth Global Customs AEO Conference!
- Celebrating the Establishment of SUNLYNN CIRCUITS(THAILAND)
- Good News! Sun&Lynn Circuits Co.,Ltd. is honored as one of the Top 100 Innovative Enterprises in Bao
- What Should You Know about Metal Core PCB
- FPC supplier : the types of Flexible PCB
- PCB manufacturer China:Why PCB board snake line, what is it used for?
- What is Metal Core PCB and types of Metal Core PCB?
- Why are High frequency PCBs much more expensive than normal PCBs?
- Flexible PCB supplier China :When to use flexible PCB?
- Flexible PCB manufacturer:What Is Flex Soldering?
Your browsing history
- FPC manufacturer:Flexible PCB Frequently Asked Questions
- FPC supplier:What are the factors of FPC processing cost?
- FPC supplier:What is Through-hole PCB Assembly
- Flexible PCB manufacturer:What are the classifications of dry film photoresists in FPC board
- PCB Board Supplier: The factor you cannot ignore
- PCB manufacturer China:8 common PCB marks on PCB boards
- FPC supplier:Standard PCB Thickness – It may not be what you think !
- High Frequency PCB Importance in Electronics Manufacturing
- Commscope
- Factors affecting high frequency PCB
A total of -comments【I want to comment】